Sweet potato starch centrifugal dehydrator

Sweet potato starch is a common natural starch, widely used in food, medicine, daily chemical and other industries. In the production process of sweet potato starch, the dehydration link is crucial. As an important equipment, the sweet potato starch centrifugal dehydrator plays an important role in improving production efficiency, reducing costs and improving product quality. 1. Functions and advantages of sweet potato starch centrifugal dehydrator Sweet potato starch centrifugal dehydrator is a mechanical equipment that can dehydrate wet sweet potato starch. It separates water from starch through the action of centrifugal force, thereby achieving the purpose of reducing moisture content and increasing the degree of starch drying. The equipment has the following advantages: 1. Improve production efficiency: The dehydrated starch can be transported and put into use faster, reducing manual operation and transportation costs. 2. Reduce energy consumption: The centrifugal dehydrator uses centrifugal force as the main force, and has lower energy consumption than the traditional heating dehydration process. 3. Improve product quality: The centrifugal dehydrator can effectively remove moisture and impurities from wet starch, thereby improving the purity and quality of starch. 4. Reduce environmental pollution: The centrifugal dehydrator reduces the processing volume of wet starch and the amount of wastewater discharged, reducing the risk of environmental pollution. 2. Structure and working principle of sweet potato starch centrifugal dehydrator Sweet potato starch centrifugal dehydrator is usually composed of a drum, a screw conveyor, a bracket and a frame. The drum rotates at high speed, and the wet starch is sent into the drum through the feed port. Under the action of centrifugal force, the water is discharged from the drum and the starch is sent to the discharge port. The screw conveyor is used to transport the drained starch from the drum to the discharge port. The principle of the centrifugal dehydrator is based on the interaction between centrifugal force and gravity. When the wet starch enters the high-speed rotating drum, the water is pushed to the outside of the drum under the action of centrifugal force, while the starch is pushed to the inside and gathered in the center of the drum. By adjusting the speed and taper of the drum, the separation effect of starch and water can be controlled. 3. Use and maintenance of sweet potato starch centrifugal dehydrator When using the sweet potato starch centrifugal dehydrator, you need to pay attention to the installation, commissioning and operation process of the equipment. Make sure that the foundation and installation location of the equipment meet the requirements, and operate and maintain it according to the instructions. During operation, it is necessary to pay attention to whether the parameters such as temperature, noise and vibration of the equipment are normal, regularly check whether the various parts of the equipment are worn or damaged, and replace the worn parts in time. In addition, it is also very important to clean and disinfect the equipment regularly. Keeping the equipment clean and dry can avoid the growth of sludge and bacteria and extend the service life of the equipment. In general, the sweet potato starch centrifugal dehydrator is a key equipment to improve production efficiency and reduce costs. Through reasonable use and maintenance, we can better play its role and provide reliable support for the production of sweet potato starch. At the same time, we should also pay attention to environmental protection and resource utilization to achieve green and sustainable development of sweet potato starch production.