Powder centrifuge

Powder centrifuge is a centrifugal separation equipment specially used for processing powder or fine particle materials. It separates solid particles and liquid in the mixture through rotating centrifugal force, thereby achieving the purpose of solid-liquid separation and dehydration. The working principle of powder centrifuge is similar to that of traditional centrifuge, mainly including the following steps: 1. Feeding: The mixture is fed into the centrifugal cylinder of the centrifuge through the feeding pipe. 2. High-speed rotation: After starting the centrifuge, the centrifugal cylinder starts to rotate at high speed, generating strong centrifugal force. 3. Separation: Under the action of centrifugal force, solid particles are pushed to the wall of the centrifugal cylinder to form a solid layer, while liquid permeates from the solid layer to form filtrate. 4. Discharge: The filtrate is discharged from the equipment through the discharge port of the centrifugal cylinder, while the solid particles remain in the centrifugal cylinder. 5. Discharge: The solid particles after dehydration form dry powder or solid material, which is pushed to the discharge port by a screw conveyor or other conveying device, and finally discharged through the discharge device. Powder centrifuges are widely used in chemical, pharmaceutical, food, metallurgy, environmental protection and other industries for solid-liquid separation, drying and dehydration of powder or fine particle materials. Through appropriate centrifugal speed and equipment parameters, efficient separation and drying of powder and fine particle materials can be achieved to meet the needs of different industries. It is necessary to select a suitable powder centrifuge according to the specific material characteristics, processing volume and required finished product quality, and reasonably adjust the equipment parameters and operating conditions to obtain the ideal separation and dehydration effect. During use, attention should also be paid to the maintenance and cleaning of the equipment to ensure the normal operation of the equipment and extend its service life.