Can the crystal dehydrator be used in circuit boards?

Crystal dehydrator usually refers to a device used to separate solid crystals from a solution. It is mainly used in the chemical, pharmaceutical, food processing and other industries. In the circuit board (PCB) industry, crystal dehydrators are not directly used because the dehydration requirements in the circuit board production process are different from the design and application of crystal dehydrators. The dehydration requirements in circuit board production usually involve the following aspects: 1. Cleaning after hole drilling: After the circuit board is drilled, it is necessary to clean and remove the dust and debris generated by drilling. 2. Cleaning after chemical treatment: After the circuit board is chemically treated (such as etching, chemical plating, etc.), it is necessary to clean and remove the chemical residues on the surface. 3. Cleaning after welding: After welding is completed, it may be necessary to clean and remove the flux residue. In circuit board production, the following equipment and technologies are more commonly used for dehydration or cleaning: - Ultrasonic cleaning machine: The cavitation effect generated by ultrasonic vibration in the cleaning liquid is used to remove dirt on the circuit board. - High-pressure water gun: Used to spray water to clean stains on the surface of the circuit board. - Centrifugal dryer: After cleaning, the centrifugal force is used to shake out the water on the circuit board for rapid drying. - Hot air dryer: Use hot air to dry the circuit board to remove moisture from the surface. Crystal dehydrators are not suitable for dehydrating circuit boards due to their design purpose and working principle. Dehydration equipment in the circuit board industry needs to be able to handle small components and complex structures on the circuit board while ensuring that no damage is caused to the circuit board. In short, crystal dehydrators are not suitable for applications in circuit boards, and circuit board production should use specially designed cleaning and drying equipment.