PRODUCTS
VR
  • Products Details

Shenzhou Group Co.,Ltd/Liaoyang Shenzhou Machinery Equipment Co.,Ltd relying on years of technical accumulation and industry experience, organically combining traditional craftsmanship with modern technology, successfully developed Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator. After years of special research and development, the products developed successfully break through the bottleneck of the pain points. Compared with the traditional ones, it better meets the market demands.

Place of Origin:ChinaType:Separating Plant
Condition:NewVideo outgoing-inspection:Provided
Machinery Test Report:ProvidedMarketing Type:Hot product2022
Warranty of core components:1 YearCore Components:Bearing, Motor
Brand Name:ShenzhouVoltage:220v/300v/380v/optional
Power:ModelWeight:600
Dimension(L*W*H):variableWarranty:1 Year
Key Selling Points:Easy to OperateApplicable Industries:Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Restaurant, Food Shop, Food & Beverage Shops, Advertising Company, Pharmaceutical plant, Chemical plant
Showroom Location:None

Product Description
Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator
Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator
Biodiesel is a clean and renewable energy. It is the reborn fuel and excellent substitute of petroleum diesel. Biodiesel is made by ester exchange process which raw material bases on plant oil crops, wild plants and engineering microalgae type aquatic plants fats as well as animal fats, food waste oil, etc. Biodiesel also is a typical “green energy”, so develop the bio-diesel has an important strategic significance in continuable economic development, promote alternative energy, reduce environment pressure and control urban air pollution. By adoptin oil and fat as raw materials, biological diesel oil is achieved through etherification reaction with methanol by adding alkali catalyst. The glycerin produced in the reaction is a subsidiary product.
Feature:
Features
* High speed centrifugation to remove oil grease and sludge impurities
* Strong emulsification ability
* Low energy consumption,saves money
* Full automation possible with PLC automatic control panel.
* Centrifugal separation requiring no filter media.
* High reliability drive train system backed by delivery of over 1,000 units a year.
* Bowl design with superior separation performance and with good response to discharge loads.
* Pilot valve regulates total/partial discharge of solids.
* Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid
* Fraction for discharge.
* Vibration-proof design realizes long working life.
Working Principle
How does Disc Separator work?
Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator
The disc separator is in vertical structure. The drum is mounted on the upper end of the vertical axis, which is driven by a motor and rotates at a high speed. There is a set of disc - shaped parts that are stacked together in the drum, with a small gap among them. When the suspension (or emulsion), which is pumped into the drum by feeding tube located in the center of the drum, pass through the gap between the discs, solid particles (or droplets) would settle down to form sediment (or liquid layer) on the disc by centrifuge force, and then the sediment slid along the surface of the disc and separated from the disc to accumulate in the largest diameter of the drum. At last, the separated liquid discharged from the outlet. The disc is utilized to shorten the settling distance of solid particles or droplets, enlarge the settlement area of the drum, and improve the production capacity of the separator. The solids accumulated in the drum are removed from the drum by manual after the machine stop, or out of the drum in the case of a dregs machine without stopping.
Main Structure
Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator
Powerful Motor provide power through the thermal coupling to drive drum in high-speed rotating around the main axis. And the liquid material is carried by feeding pipe located in the upper center into the bottom of the drum, and then led in the porthole below the disc and driven to the drum wall. Under centrifugal force, solid- liquid-liquid do the below motion to complete thorough separation:solid phrase, which is heavier than liquid, would sink into the inner wall of the drum for sediment formation; light liquid flow in centripetal pump, and be discharged by liquid outlet; The heavy liquid tends to the drum wall along the cone inside the disc, and then flows upward through through the heavy liquid concentric pump to be discharge from the outlet.
Fully Automatic Centrifugal Oil Water Separator Vacuum Disc Stack Separator
Due to the double-conical design of the inner cavity of the drum, it can compress the slag and increase its concentration.
Besides, some nozzles is mounted around the drum to spray slurry sediment, whose number and aperture are determined on the properties of the suspension, the degree of concentration and the amount of treatment.
In order to improve the slag concentration, recovery device is configured with this disc separator to the discharged sediment for reuse. For the solid concentration of the slag can be increased by 5~20 times than that of the feeding materials.
The processing capacity of the separator is up to 30t/h, which is suitable for suspension with solid phrase in diameter of 0.1~100 microns and concentration less than 10% (maximum to 25%).
Disc Oil Separator Application:
Treatment of lube
Treatment of oil, water and solid substances
Treatment of drilling slurry
Water removal of crude oil
Treatment of cooling lubricant
Treatment and water removal of lubricant and hydraulic oil
Treatment of waste emulsion and waste oil
Treatment of aging oil

Specification
Model
Treatment capacity (L/H)
Inlet Pressure (Mpa)
Outlet pressure (Mpa)
Motor power (Kw)
Weight (Kg)
Outline dimension (mm)
DHZ360
1200-2500
0.05
0.1-0.25
7.5
1280
1500*1150*1500
DHZ470
2500-7000
0.05
0.1-0.25
15
1880
1800*1200*1800
DHZ550A
5000-10000
0.05
0.1-0.25
18.5
2200
1850*1550*2050
DHZ550E
6000-15000
0.05
0.1-0.25
22
2200
1850*1550*2050
DHZ700
15000-30000
0.1
0.2
30
3300
2100*1650*2300
DRZ360
1200-2500
0.05
0.1-0.25
5.5
750
1250*1050*1500
DRZ400A
2000-6000
0.05
0.1-0.3
7.5
1150
1300*900*1450
DRZ400E
4000-7500
0.05
0.1-0.3
7.5
1300
1300*900*1500
DRZ550
6000-18000
0.05
0.1-0.3
22
2200
1620*1300*2200
Company Profile
Liaoyang Shenzhou Machinery Equipment Co., Ltd is a professional for supplier of pharmaceutical and chemical machine in China.We have a well-experienced team and a professional design institute,With rich experiences in pharmaceutical machinery and equipment including packing machine, centrifuge, falling film evaporator, distillation,mixer, tablet press machine, suppository production line,dryer,capsule filling machine ,capsule and so on.Our products are exported to many countries and areas, such as the USA, Korea, India, Indonesia,Thailand, Vietnam,Japan, Denmark,Romania, Bulgaria,Russia,South Africa, and so onAt the same time,our product with best prices and good quality,welcome to Shenzhou!
Packing & Delivery
wooden case
FAQ
1. who are we?
We are based in Liaoning, China, start from 1980 sell to South America(12.00%),Southeast Asia(10.00%),Northern Europe(10.00%),Southern Europe(10.00%),Domestic Market(10.00%),South Asia(8.00%),Central America(6.00%),North America(5.00%),Eastern Europe(5.00%),Africa(5.00%),Oceania(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Mid East(4.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Centrifuge,Separator,Packing machine,Drying machine,Filling & Sealing machine

4. why should you buy from us not from other suppliers?
We have a well-experienced team to manufacture pharmaceutical machinery and equipment and a professional design institute. With rich experience in pharmaceutical machinery and equipment field and numbers of professional engineers.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Italian
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

Send your inquiry

LEAVE A MESSAGE

Welcome all who care engaged in the separation and filtration to work with us,and we are also looking for the qualified world wide agents to provide better service and deep marketing.

Send your inquiry

Choose a different language
English
Español
Português
русский
한국어
français
العربية
Deutsch
日本語
Current language:English