Tubular Centrifuge

Introduction to high speed tubular centrifugeAs an equipment manufacturer dedicated to providing users with separation solutions, Shenzhou recently released high-speed tubular centrifuge for the fine separation industry. Tubular centrifuge is a high-speed sedimentation centrifuge with a rotating bowl (also called rotor). Its bowl is of small diameter, long length, high speed and centrifugal separation factor of more than 10000. It can separate materials that are difficult to be separated by general centrifuges, such as suspension or emulsion with small solid concentration, fine particles (d separation = 0.5 ~ 1.0 μ m), large liquid viscosity and small solid-liquid density difference.Different from horizontal decanter centrifuge and automatic slag discharge disc stack separator, tubular centrifuge belongs to manual slag removal equipment with limited treatment capacity, therefore it is suitable for working conditions with low solid content and relatively small treatment capacity. Tub...

tubular centrifuge for nano particle separationHigh Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation.The GQ type is mainly used for a variety of difficult-to-separate suspensions in the separation industry, and is especially suitable for the separation of solid-liquid two-phase separations with thin concentration, fine particles and small specific gravity differences.The GF type is mainly used for various difficult-to-...

PrincipleProbiotic Harvest Tubular Centrifuge consists of machine body, driving part, bowl, liquid collecting pan and liquid-in bearing seat etc.The material is sprayed onto the bowl from the inlet on the bottom and strong centrifuge force is formed when the bowl rotates with the material and that makes the material flow upper along the wall of the bowl and then separated because of the different gravity by the centrifuge force.Heavy solid is deposited on the inner wall of the bowl,and forms the sludge. And it will be discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl.The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise.

High Speed Tubular CentrifugeWorking Principle This separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing. The upper of the bowl is flexible main shaft and the lower of it is damp floating bearing. The main shaft is connected through and with a buffer of connecting seat and a driven wheel. The driven wheel is driven by a motor through driving wheel and tension gear to make the bowl rotate around its own axis at an extra speed and form a strong centrifuge force field. The stock flows into the liquid inlet from the bottom and is forced by centrifuge force to flow up to and along the inner wall of the bowl and then is separated thedifferent layer according to density difference of the different liquid components.GQ type: Fine solid phase particles with great density are settled on the inner wall of the bowl gradually to form residue layer then to be discharged manually, after the machine stops. The liquid phase flows out of the liquid outlet at ...

tubular centrifugeCentrifugal extractor is the equipment motor transmits power to the belt pulley and main shaft on the machine head through the transmission belt and the pressure pulley, thereby driving the drum to rotate at high speed around its own axis, forming a strong centrifugal force field on the inner wall of the drum. The material is injected into the drum from the bottom inlet, and the material liquid is forced to move in layers under the action of strong centrifugal force.Mainly used to separate various difficult-to-separate emulsions, especially suitable for the separation of liquid and liquid with little difference in two-phase density (the specific gravity difference is greater than 0.1%), and the three-phase separation of liquid, liquid and solid with a small amount of impurities

Introduction
Cell separation or harvesting is the first step towards downstream bioprocess and is required for the recovery of either
extra- or intracellular products. A few different equipments
can be found in industrial practices, and centrifuges are
among the most commonly used in fermentation applications. Conventional centrifuges are a widely chosen option.
In fact, being commonplace in laboratories, the relative ease
of use and other advantages such as temperature control
and variable speed make them a great choice, mainly for
small-scale processes. The volume of the bucket is usually
a limitation for this type of centrifuge [1].
For larger scales, continuous centrifuges have been the instrument of choice. The tubular-cylinder continuous centrifuges, in particular, are separation instruments characterized
by their ability to process many times the capacity of their
cylinder total volume without interruption. This characteristic
results from a design that allows continuous feed...

pore bacteria Tubular Centrifugal Separator.High Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation.The GQ type is mainly used for a variety of difficult-to-separate suspensions in the separation industry, and is especially suitable for the separation of solid-liquid two-phase separations with thin concentration, fine particles and small specific gravity differences.The GF type is mainly used for various difficult-to-sep...

High Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation.

High-speed Biotechnology centrifuges are designed for applications where a continuous process of separation is required, be it liquids and solids separation, extraction, concentration and clarification of substances with high viscosity, separation of solids with small volume fractions, caustic substances and other fields of application

Best China tubular centrifuge manufacturer,high quality tubular centrifuge,tubular centrifuge is used to separate solids from a liquid (also referred to as clarifying cylinder), tubular centrifuge which continuously separates two liquids.The tubular centrifuge comprises of bowl, specially designed slow acceleration motor and starter.

Introduction: Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle, it has been widely used in pharmaceutical, health food, drinks, chemical industries to separate the liquid-solid or liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few solid granules and high erosion products.

General DescriptionThe GQ125 Tubular Bowl Centrifuge With Cooling System is mainly used in liquid-solid separation, liquid-liquid-solid separation in bio-pharmacy, beverage, chemical industry. It is an ideal separation equipment by centrifuging, especially for those feeding with little gravity difference, and small dimension in diameter.