Products

Waste Oil Processing centrifugeState-of-the-art of 2-phase and 3-phase decanter centrifuge separation technologySetting the benchmark for a variety waste oil applicationsSpecially equipped high "G" force 2 and 3-phase decanter centrifuges provide more efficient separation processes for these typical waste oil applications:Oily residues, slop oils and sludges from oil refineriesBS&W storage tank bottom solids and waterOil sludge lagoonsOil water mixtures from ship ballastsAPI separator sludgeOilfield and drilling mud waste oilsDiscarded lubricant oils and emulsions or otherIndustrial oil / water and emulsion waste streamsOily WWTP sludgesSpecially equipped 3-phase decanter centrifuges for oil sludge treatment include:Many years of Hiller decanter development & optimizationDecanter features include:Adjustable centripetal pump for light phaseInert gas flushing of housing and seals for explosion protectionTailor-made scroll and bowl design

High Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation.

Introduction to high speed tubular centrifugeAs an equipment manufacturer dedicated to providing users with separation solutions, Shenzhou recently released high-speed tubular centrifuge for the fine separation industry. Tubular centrifuge is a high-speed sedimentation centrifuge with a rotating bowl (also called rotor). Its bowl is of small diameter, long length, high speed and centrifugal separation factor of more than 10000. It can separate materials that are difficult to be separated by general centrifuges, such as suspension or emulsion with small solid concentration, fine particles (d separation = 0.5 ~ 1.0 μ m), large liquid viscosity and small solid-liquid density difference.Different from horizontal decanter centrifuge and automatic slag discharge disc stack separator, tubular centrifuge belongs to manual slag removal equipment with limited treatment capacity, therefore it is suitable for working conditions with low solid content and relatively small treatment capacity. Tub...

A disc stack centrifuge is a specific kind of centrifugal separator. A set of conical plates (disc stack) is added to the bowl of a centrifugal separator. Addition of the 'disc stack' introduces more settling area. This added surface area speeds up the separation process exponentially.

Product DescriptionThe disc centrifuge is a kind of vertical centrifuge, which can separate the solid liquid and the liquid liquid in a rapid and continuous manner.Inside the drum is a set of disc - shaped parts that overlap each other - discs.There is a small gap between the disc and the disc. Suspension (or emulsion) is added to the drum by the feed tube at the center of the drum.When the suspension (or emulsion) passes through the gap between the discs, the solid particles (or droplets) sink down to the disc under gentrification to form a sediment (or liquid layer).The sediment slides off the disc along the surface of the disc and accumulates in the part with the largest diameter inside the drum. The separated liquid is discharged from the outlet of the drum. The function of disc is to shorten the settlement distance of solid particles (or drops) and enlarge the settlement area of drum.The solid accumulated in the drum is removed manually after the separator stops working, or is ...

Waste Oil Processing centrifuge:State-of-the-art of 2-phase and 3-phase decanter centrifuge separation technologySetting the benchmark for a variety waste oil applicationsSpecially equipped high "G" force 2 and 3-phase decanter centrifuges provide more efficient separation processes for these typical waste oil applications:Oily residues, slop oils and sludges from oil refineriesBS&W storage tank bottom solids and waterOil sludge lagoonsOil water mixtures from ship ballastsAPI separator sludgeOilfield and drilling mud waste oilsDiscarded lubricant oils and emulsions or otherIndustrial oil / water and emulsion waste streamsOily WWTP sludges

tubular centrifuge for nano particle separationHigh Speed Tubular Centrifuge, also called Tubular Bowl Separator, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation.The GQ type is mainly used for a variety of difficult-to-separate suspensions in the separation industry, and is especially suitable for the separation of solid-liquid two-phase separations with thin concentration, fine particles and small specific gravity differences.The GF type is mainly used for various difficult-to-...

PrincipleProbiotic Harvest Tubular Centrifuge consists of machine body, driving part, bowl, liquid collecting pan and liquid-in bearing seat etc.The material is sprayed onto the bowl from the inlet on the bottom and strong centrifuge force is formed when the bowl rotates with the material and that makes the material flow upper along the wall of the bowl and then separated because of the different gravity by the centrifuge force.Heavy solid is deposited on the inner wall of the bowl,and forms the sludge. And it will be discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl.The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise.

High Speed Tubular CentrifugeWorking Principle This separator is consisted of main body, driving device, bowl collecting pan and liquid-in bearing. The upper of the bowl is flexible main shaft and the lower of it is damp floating bearing. The main shaft is connected through and with a buffer of connecting seat and a driven wheel. The driven wheel is driven by a motor through driving wheel and tension gear to make the bowl rotate around its own axis at an extra speed and form a strong centrifuge force field. The stock flows into the liquid inlet from the bottom and is forced by centrifuge force to flow up to and along the inner wall of the bowl and then is separated thedifferent layer according to density difference of the different liquid components.GQ type: Fine solid phase particles with great density are settled on the inner wall of the bowl gradually to form residue layer then to be discharged manually, after the machine stops. The liquid phase flows out of the liquid outlet at ...

tubular centrifugeCentrifugal extractor is the equipment motor transmits power to the belt pulley and main shaft on the machine head through the transmission belt and the pressure pulley, thereby driving the drum to rotate at high speed around its own axis, forming a strong centrifugal force field on the inner wall of the drum. The material is injected into the drum from the bottom inlet, and the material liquid is forced to move in layers under the action of strong centrifugal force.Mainly used to separate various difficult-to-separate emulsions, especially suitable for the separation of liquid and liquid with little difference in two-phase density (the specific gravity difference is greater than 0.1%), and the three-phase separation of liquid, liquid and solid with a small amount of impurities

Introduction
Cell separation or harvesting is the first step towards downstream bioprocess and is required for the recovery of either
extra- or intracellular products. A few different equipments
can be found in industrial practices, and centrifuges are
among the most commonly used in fermentation applications. Conventional centrifuges are a widely chosen option.
In fact, being commonplace in laboratories, the relative ease
of use and other advantages such as temperature control
and variable speed make them a great choice, mainly for
small-scale processes. The volume of the bucket is usually
a limitation for this type of centrifuge [1].
For larger scales, continuous centrifuges have been the instrument of choice. The tubular-cylinder continuous centrifuges, in particular, are separation instruments characterized
by their ability to process many times the capacity of their
cylinder total volume without interruption. This characteristic
results from a design that allows continuous feed...

3 Phase Decanter Centrifuge3 phase Decanter Centrifuge:3 phase liquid-liquid-solid Decanter centrifuges, also called tricanter , Taking advantage of the principle that the heavyliquid,light liquid and solid phase, with different density and mutually insoluble in the mixed liquid, gain differentsedimentation speed in the centrifugal force field or gravity force field, separating stratification or causing the solidparticles in the liquid to deposit can be achieved.It is the popular machine throughout the world and widely used in the crude oil separation.Specially used for remove sludge and water from crude oil.