Disc Centrifuge Separator

Product Description3 phase disc stack separator is a high-speed, stable, sealed, efficient, and automatic slag discharge separation equipment. It is widely used for liquid, liquid, solid 3-phase separation or liquid-liquid separation. The 2-phase solid-liquid separation disc separator has only one liquid discharge port and one slag discharge port, while the 3-phase disc separator has two liquid discharge ports and one slag discharge port, which can separate two liquids with different specific gravity at the same time. It can also discharge solid phase materials.The 3 phase disc separator has larger rotation speed and G force is up to 12000G. Therefore, the 3 phase disc separator can more thoroughly separate liquids with different specific gravity and the liquid phase discharged is more clarified. However,  3 phase disc separator is more used to separate materials containing fine particles, with less solids content.

Our separator is mainly applied in the purification and clarification of the diesel, light fuel oil, heavy fuel oil and other mineral oil, to remove the water, moisture, mechanical impurities and some harmful substances of the oil. This model is automatic slag type, high separation efficiency, no need to disassemble to slag. It can be automatic controlled according to requirement which greatly reduce the labor intensity of the operating. This machine by the accurate calibration balancing, little vibration, can be long-running and operated safety and reliable.

Centrifuge machine from China:The 2 phase disc stack separator is used to separate the fine particles from the liquid and discharge clarified liquid. Compared with decanter centrifuge, the G force of 2 phase disc stack separator is much higher than decanter centrifuge. The disc stack separator G force is up 12000g. Generally, the G force of the decanter centrifuge is about 3000G. The high speed and G force makes the disc stack separator to produce high clarified liquid. However, the materials separated by disc separator should not have high solid content or big particles. Usually the particles content should be less than 3%, it’s better to be 1%. Therefore, in some application, pre-treatment will be carried out by decanter centrifuge or other separation equipment, and then clarification and separation will be carried out in the 2 phase disc stack separator. The 2 phase disc stack separator is widely used in vegetable oil clarification, biological and chemical pharmaceutical industry...

Model RPDB311SJ-01 separator is mainly used for clarifying and defating of milk,It is also used for the similar oil to clarify the liquid-liquid-solid three phase materials.Product DescriptionThis kind centrifuge is a separator for separating solid, liquid and liquid for chemical, pharmaceutical, oil, foodstuff, milk industry, daily industry and defense industry etc..It has three types for solid discharge such as central value slagging, artificial slagging, and water push slagging.The first type is mainly used in the desertification of oil refining, and the last two types are used in gumming and dehydrating, they are all applicable for liquid-liquid-solid and liquid–solid separation.It has advantages of high speed, smooth operating, compact structure, small footprint, all sealed of the inlet and discharge, little noise, good separation.Features:1.Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise and vibration, the installation p...

 3 phase disc stack separator is a high-speed, stable, sealed, efficient, and automatic slag discharge 3 phase separation equipment. It is widely used for liquid, liquid, solid 3-phase separation or liquid-liquid separation.

Product DescriptionFuel Oil Separator is mainly used to remove water and mechanical impurities(cat fines) from diesel oil, lubricating oil, heavy fuel oil(HFO) and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.

There are two kind of disc stack centrifuge ,2 phase disc stack centrifuge and 3 phase disc stack centrifuge.2 phase disc stack centrifuge specially used for solid-liquid separation.3Phase disc stack centrifuge specially used for liquid-liqiud or liquid-liquid-solid separation.

2 phase disc stack separator with high speed rotation and high separation factor,so the separation result is very good.2 phase disc stack separator is used to separate the fine particles from the liquid and discharge clarified liquid. Compared with decanter centrifuge, the G force of 2 phase disc stack separator is much higher than decanter centrifuge.

The disks centrifuges from Shenzhou Group with automatic discharge are designed and built to separate a mixture of liquids having different specific weight and a solid. The bowl “self-cleaning” or “with automatic discharge” means the capacity of the centrifuge to eject the solids, which have been separated from the liquids, using an hydraulic system in the bowl bottom, while running at full speed.

Continuous Solids-Discharging Centrifugation: A Solution to the Challenges of Clarifying High–Cell-Density Mammalian Cell Cultures

Our disc centrifuge specially used for crude oil separation

High-speed centrifuge separator are widely used in a variety of biological processes from cell harvesting and clarifying to separations of chemicals, food, blood and pharmaceuticals. High performance is consistently achieved in continuous, semi-continuous or batch operations.