Tubular Centrifuge

Products Description       GQ Series Tubular Separator is mainly used for separating all kinds of suspension difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, fine particles and very small differential gravity of the two phases,it is suitable for solid content lower 2% . Because tubular separator is manual discharging machine. But as it is manual discharging machine , so the capacity from 10-500 L per hour . Depend on the Situation of your material .

There are two types tubular bowl centrifuge.One type is GQ  for solid-liquid separation.One type is GF for liquid-liquid or liquid-liquid-solid separation.

Shenzhou Machinery aims at the problem of cell separation: a tubular centrifuge specially developed for cell separation from fermentation broth. The centrifuge has good separation effect and is the preferred equipment for bacterial separation

Rotational Speeds that Provide Excellent Separation:The rotational speed of a centrifuge is directly related to the separation effect and output of the centrifuge, and the same is true for tubular centrifuges. Under the same conditions, the higher the rotational speed is, the better the separation effect and the greater the output. Our GQ105 tubular centrifuge factory speed 18400r/min (up to 19000r/min, ±100), other manufacturers of the same type of machine is 16000-16300r/min, our company this type of tubular centrifuge can be separated from liquid materials in more than 30 nanometers of particles, other manufacturers of the same type of machine can be separated from more than 300 nanometers of particles. The output is more than 25% higher.

Tubular Continuous Centrifuge:The tubular centrifuge is used primarily for the continuous separation of liquids from liquids or of very fine particles from liquids, although in some cases it is employed as a batch-type centrifuge. In general, it is used when higher centrifugal fields are required for separation. The rotating bowl of a tubular centrifuge consists of a long hollow tube (length many times its diameter) as shown schematically in Figure 1. For continuous separation the feed or material to be centrifuged enters at one end near the axis and is removed in two streams containing the separated material. In many cases the separation is not complete, and the separated fractions must be passed through the machine several times. Many different designs for the internal structure of the tube are employed, but, in general, radial vanes are used to bring the feed material up to speed and to slow down the separated streams before they are discharged. The centrifuge is driven by a high...

High-speed separation & clarification. GQ series Tubular Centrifuge from Shenzhou Separator is a high-speed solid bowl type machine for continuously removing solids from liquid with density difference.High speed separation & clarification. GF series Tubular Centrifuge from Shenzhou Separator is a high speed solid bowl type machine for continuous separation of two immiscible liquids with density difference. This centrifuge is also used to separate small quantity of impurities from liquids.

The blood separator is one kind of tubular separator. This machine is the improved one on the base of the original separator and through experiment again and again. This kind of machine can be extensively used in separating blood plasma and cell of pig, cow, sheep and chicken etc.

GQ125 two phase tubular centrifuge machine for micro algae separation GMP The rapid centrifugal separation and harvest of the mixture of active seaweed and culture fluid overcomes the disadvantages of poor separation effect and low efficiency in the past, which can only separate seaweed of a single volume and weight. The use of automated centrifugal separation operations not only reduces the labor intensity of the operators, but also improves the efficiency of seaweed separation and extraction.

The GQ75 tubular centrifuge is a type of laboratory - scale high - speed centrifuge suitable for separating bacteria,

The Escherichia coli microorganisms are concentrated or collected by high-speed centrifugation. The subsequent process depends on the temperature tolerance of the bacteria. In order to improve the collection rate of the bacteria and ensure the activity of the bacteria, a cooling device can be added inside the separator body, and the bacteria separator drum check valve can be used inside to prevent bacteria from being contaminated. The drum is lined with a device to collect bacteria more conveniently.

GQ Type tubular centrifuge is composed of main body, transmission device, drum, liquid collecting tray, and liquid-feeding bearing base. There is a flexible main axis on the top of drum, and a damping floating bearing at its bottom. With the linked buffering device, the main axis is connected with the passive wheel. Through the conveyor and the fastening wheel, motor provides power for the passive wheel, so the drum rotates around itself axis by high speed, and form strong centrifuge force field. Materials are launched from the bottom feeding inlet, by the centrifugal force, liquid flows upward along the drum wall, and is separated to layers because their different density.

Tubular Centrifuges are designed to separate low percentages (<2%) of suspended solids which are between 1 and 0.001 microns in size, and to separate two immiscible liquids of differing densities. Tubular Centrifuges operate at high speed, generating up to 20,000 gravities of centrifugal force, causing solids to collect inside the smooth bore of the stainless steel tube where they are easily recovered.